Transformer core cutting machine

Technical data of this equipment

1.Coil Specification

a. Applicable material: silicon steel coil

b.   Quality of material: Domestic Authentic silicon steel or International  Standard silicon steel

c.   Material thickness:0.23-0.35mm

d. Material width:40- 400 （ Max ）

e. Coil inside diameter range:495-510mm

2.Single-head coil weight:1.5t

3.Motor speed: about 0-180m/min

4.Transverse shear knife material:YG11-N

5.Transverse shear knife hardness: HRA87.8

6.Transverse shear knife density:14.45g/cm³

7.Transverse shear knife bending strength3180N/ mm²

8.Installed power:24KW

2.Data of finished product

a. Sizing length:350 —9000mm

5.Sizing tolerance:±0.20mm/2m during uniform speed c. Cutting angle precision±0.025°

d.Cutting burr: ≤0.02mm e. Punching burr:≤0.02mm

1Other data of the equipment:

2

 a. Power supply:380V/50Hz 

 b. Floor area (approximately):    14    m long ×    2.5    m wide 

 c.  Direction  of  production  line:  from  right  to  left  (facing  the  line  at  the

console) 

 d. Color of equipment: pea green with faint yellow 

 e. Elevation of working face:about 1000mm